【Product Description】
10 Port GigabitIndustrial Ethernet PoE Switch, 8 Gigabit PoE Ports + 2 *2.5G SFP Port(Compatible with 1.25G / 155M) + 1*Console Port, supporting Din rail and wall mounting. Supports dual power input (DC12-55V); -40 to 85℃ working temperature; Certified by industrial environment and support FCC, CE, CCC, RoHS standards; Reliable industrial design ensures uninterrupted automation system Stable operation.
his series of industrial grade switches can be widely used in wind power, electric power, assembly automation, subway PIS, electric power SCADA, sewage treatment, metallurgy, intelligent transportation, rail transportation, military and other industries. It is a green low-power industrial Ethernet switch.
This series of switches provides advanced network management capabilities: redundant ring, loop protection, VLAN, QOS, speed control, port mirroring, and firmware online upgrades. With standardized industrial design, it can meet the stringent requirements of industrial sites. All components use industrial grade for greater reliability, providing redundant, wide-voltage power inputs and outputs for uninterrupted industrial safety communications.
Product Name | 10 Ports Gigabit Managed Industrial PoE Switch |
Product Model | HR600-AFGM-82AS |
Port Definition | 8*Gigabit PoE Ports + 2 *2.5G SFP Port(Compatible with 1.25G / 155M) + 1*Console Port |
Network Protocols | IEEE802.3 IEEE802.3u IEEE802.3z IEEE802.3ab IEEE802.3x IEEE802.1d IEEE802.1w |
POE Parameters | POE Standard: IEEE 802.3af/IEEE 802.3at |
Single PoE Port Power Output: Max: 15.4 W (IEEE 802.3af) Max: 30 W (IEEE 802.3at) | |
PoE Compatibility: IEEE 802.3af / at adaptive | |
POE Power Output:DC48-55V | |
POE Power Pin:1/2- ; 3/6+ | |
Network Media | 10BASE-T: Cat3,4,5UTP(≤100 米) 100BASE-TX: Cat5 or aboveUTP(≤100 米) 1000BASE-TX: Cat5 or aboveUTP(≤100 米) |
Fiber Media | Multi-mode:850nm,1310nm Transmission Distance:550m/2Km Single-mode:1310nm,1550nm Transmission Distance:20/40/60/80/100/120Km |
Power Supply | Input Voltage: DC12~55V Type of input: 4 PIN Industrial Terminal(blockV1+V1- V2+ V2-) |
Physical structure | Protect grade: IP40 Installation:DINRail Product weight: 0.8 KG Package weight: 1.1KG(Without power) Product Dimensions (L×W×H): 165mm×130mm×65mm Package Dimensions (L×W×H): 245mm×21mm×88mm Standard packing (L×W×H): 600mm×495mm×435mm Standard packing quantity: 28(PCS) |
Working Environment | Operating temperature: -40~85℃ Storage temperature: -40~85℃ Humidity: 5%~95 % ( No condensation) |
Industry Standard | EMI: FCC Part 15, CISPR (EN55032) class A EMS: EN61000-4-2 (ESD) EN61000-4-4 (EFT) EN61000-4-5 (Surge) Shock: IEC 60068-2-27 Free fall: IEC 60068-2-32 Vibration: IEC 60068-2-6 |
Certification | CE mark, commercial |
MTBF | 100,000 hours |
Packing list | 1.Industrial grade switch: 1 Set 2.Instruction manual: 1PCS 3.Certificate, warranty card: 1PCS 4.Serial cable:1PCS 1.Operation manual CD:1 PCS |
Warranty | 5 years |
HardwareParameters | |
Bandwidth | 24Gbps |
PacketBufferMemory | 4M |
Chip Solution | VSC7424 |
PacketForwarding Rate | 14.88Mpps |
MAC | 8K |
Forwarding Mode | Store-And-Forward |
L2 management | |
Port Management | Support for enabling/disabling ports Support speed, duplex, MTU settings, etc. Support flow control flow control settings Support port mirroring, etc. Support port access direction Support port speed limit Support port isolation settings Unknown unicast, multicast, broadcast storm suppression |
STP | Standard Spanning Tree (STP) 802.1d Rapid Spanning Tree (RSTP) 802.1w Multiple Spanning Tree (MSTP) 802.1s |
Ring Network Protocol | ERPS |
Link Aggregation | Support static manual aggregation Support LACP dynamic convergence |
VLAN | Support Port based VLAN and IEEE 802.1Q VLAN |
IGMP snooping | Support static add / delete |
MAC | Support static add / delete MAC address learning limit Support dynamic aging time settings |
L3 ( Layer 3 Switching ) and Router Function | |
Interface Configuration | Support virtual VLAN interface |
ARP | Support check ARP |
Router Function | Static Router |
Extended Function | |
ACL | based on the source MAC, destination MAC, protocol type, source IP, destination IP, L4 port number Support time-range time management |
QOS | based on 802.1p (COS) classification Based on DSCP classification Based on the source IP, destination IP, port number classification Support SP, WRR, DRR scheduling strategy Support traffic speed limit CAR |
LLDP | supports LLDP link discovery protocol |
User Setting | Support add/delete user |
Log | User login, operation, status, event log |
Port security | Dyning Gasp、Snmp Trap |
Prevent Attack | DOS defense Support for CPU protection, limited to send CPU message rate ARP binding (IP, MAC, PORT binding) |
System Management | Device reset, configuration save/restore, upgrade management, time setting, etc. |
Management Function | |
CLI | Support serial command line management |
TELNET | Support serial command line management |
SSH | Support SSHv1/2 remote management |
SNMP | Support v1/2/3 |
WEB | Support two layers of settings |
PoE | POE Power management |