【Product Description】
14 Port Gigabit Industrial Ethernet PoE Switch,10*Gigabit PoE Ports(9-10 Port Support BT) + 4*Gigabit SFP Port (13-14 Port support 2.5G, Compatible with 1.25G/155M) + 1*Console Port,Integrated bypass protection function, Support Din rail and wall mounting. Supports dual power input (DC48-55V); -40 to 85℃ working temperature; Certified by industrial environment and support FCC, CE, CCC, RoHS standards; Reliable industrial design ensures uninterrupted automation system Stable operation.
Conventional parameters | |
Product Name | 14 Ports Gigabit Industrial Managed PoE Switch |
Product Model | HR600-AXGM-SWG20104AS-BP |
Port Definition | 10*Gigabit PoE Ports(9-10 Port Support BT) + 4*Gigabit SFP Port (13-14 Port support 2.5G, Compatible with 1.25G/155M) + 1*Console Port |
Network Protocols | IEEE802.3 IEEE802.3u IEEE802.3z IEEE802.3ab IEEE802.3x IEEE802.1d IEEE802.1w |
POE Parameters | POE Standard: IEEE 802.3af/IEEE 802.3at/IEEE802.3bt Single PoE Port Power Output: Max: 15.4 W (IEEE 802.3af) Max: 30 W (IEEE 802.3at) Max:90 W (IEEE 802.3bt) PoE Compatibility: IEEE 802.3af / at / bt adaptive POE Power Output:DC48-55V POE Power in:1/2- ; 3/6+ (bt:1/2- 3/6+;4/5+ 7/8-) |
Network Media | 10BASE-T: Cat3、4、5 UTP(≤100 M) 100BASE-TX: Cat5 or aboveUTP(≤100 M) 1000BASE-TX: Cat5 or aboveUTP(≤100 M) |
Bypass | P1: Optical Fiber in or out Port (P3 and P4 are corresponding outlets, recommended to connect A ) P2: SFP Module Fiber Port (P3 as corresponding outlets, recommended to connect A ) P3: Optical Fiber in or out Port (P1 and P2 as corresponding outlets, recommended to connect B ) P4: SFP Module Fiber Port (P1 as corresponding outlets, recommended to connect B ) |
Fiber Media | Multi-mode:850nm,1310nm Transmission Distance:550m/2Km Single-mode:1310nm,1550nm Transmission Distance:20/40/60/80/100/120Km |
Power Supply | Input Voltage: DC48~55V Type of input: 4 PIN terminal (blockV1+V1- V2+ V2-) |
Physical structure | Protect grade: IP40 Installation:DIN Rail Product weight: 1 KG Package weight:1.3KG(Without power) Produc Dimensions(L×W×H): 188mm*130mm*64mm Package Dimensions(L×W×H): 250mm×210mm×88mm Standard packing(L×W×H): 608mm×500mm×435mm Standard packing quantity:28 (PCS) |
Working Environment | Operating temperature: -40~85℃ Storage temperature: -40~85℃ Humidity: 5%~95 % ( No condensation) |
Industry Standard | EMI: FCC Part 15, CISPR (EN55032) class A EMS: EN61000-4-2 (ESD) EN61000-4-4 (EFT) EN61000-4-5 (Surge) Shock: IEC 60068-2-27 Free fall: IEC 60068-2-32 Vibration: IEC 60068-2-6 |
Certification | CE mark, commercial |
MTBF | 100,000 Hours |
Packing list | Industrial grade switch: 1 Set Instruction manual: 1PCS Certificate, warranty card: 1PCS Serial cable:1PCS Operation manual CD:1 PCS |
Warranty | 5 years |
HardwareParameters | |
Bandwidth | 34Gbps |
PacketForwarding Rate | 25.29Mpps |
RAM | 128MB |
Flash | 16MB |
PacketBufferMemory | 4M |
Jumbo frame | 9.6Kbytes |
VLANs | 4096 |
MAC | 8K |
Forwarding Mode | Store-And-Forward |
L2 management | |
Port management | Support enable / disable port Support speed, duplex, MTU setting, etc. Support flow control flow control settings Support port mirroring. Support port in / out direction Support port speed limit Support port isolation setting Unknown unicast, multicast, broadcast storm suppression |
STP | Standard Spanning Tree (STP) 802.1d Rapid Spanning Tree (RSTP) 802.1w Multiple Spanning Tree (MSTP) 802.1s |
Ring Network Protocol | ERPS |
Link Aggregation | Support static manual aggregation Support LACP dynamic convergence |
VLAN | Support Port based VLAN and IEEE 802.1Q VLAN |
IGMP Snooping | Support static add / delete |
MAC | Support static add / delete MAC address learning limit Support dynamic aging time settings |
L3 ( Layer 3 Switching ) and Router Function | |
Interface Configuration | Support virtual VLAN interface |
ARP | Support check ARP |
Router Function | Static Router |
Extended Function | |
ACL | based on the source MAC, destination MAC, protocol type, source IP, destination IP, L4 port number Support time-range time management |
QOS | based on 802.1p (COS) classification Based on DSCP classification Based on the source IP, destination IP, port number classification Support SP, WRR, DRR scheduling strategy Support traffic speed limit CAR |
LLDP | supports LLDP link discovery protocol |
User Setting | Support add/delete user |
Log | User login, operation, status, event log |
Port security | Dyning Gasp、Snmp Trap |
Prevent Attack | DOS defense Support for CPU protection, limited to send CPU message rate ARP binding (IP, MAC, PORT binding) |
System Management | Device reset, configuration save/restore, upgrade management, time setting, etc. |
Management Function | |
CLI | Support serial command line management |
TELNET | Support serial command line management |
SSH | Support SSHv1/2 remote management |
SNMP | Support v1/2/3 |
WEB | Support two layers of settings |
PoE | POE Power management |